Be Kind of Easy to Make Beacon Dont Even Make

Download Article

Download Article

Beacons are symbols of status and prestige in Minecraft. Only the best players have them since they require a lot of expensive materials as well as the Nether star, which you can only get by summoning and defeating the super challenging Wither. If you're up for the challenge, check out the steps below. This article will walk you through everything you need to do craft a beacon and build a tower for it.

1. 1

   Know the layout of a beacon. A beacon is, at minimum, a three-by-three, one-block high square base of at least iron blocks (though gold, diamond, emerald and/or netherite blocks will also do) with a beacon unit placed on top of it. If you want to enhance your beacon's power and range, you'll need an additional square base of five by five, seven by seven, and nine by nine per power level, respectively.

   • Creating a beacon can be a tedious process, since you need a bare minimum of 81 iron ingots to craft the base alone.

2. 2

   Gather the necessary materials. To craft a beacon, you will need the following items:

   • At least 81 iron ore - Mine a lot of iron ore—which is the grey stone with orange spots—with a stone pickaxe or better. You can use emeralds, gold, or diamonds instead, but these minerals are far rarer than iron and they have no different effect on the beacon.
   • Three blocks of obsidian - Obsidian is formed by water hitting lava from above. You can find it deep in caves. You will need a diamond pickaxe to mine obsidian.
   • Five blocks of sand - You'll use this to make glass.
   • Nether Star - Kill the Wither and pick up the star that it drops. The Wither is exceedingly difficult to spawn and kill for lower-level players, so make sure you're prepared.
   • Fuel - Wood planks or coal will work fine. You'll need this for your furnace when smelting the glass and iron bars.

   Advertisement

3. 3

   Smelt your iron ore. Open your furnace, place all 81 iron ore pieces in the top square, and place your fuel source in the bottom square. Once all 81 ores have been created, you can move them back to your inventory.

   • In Minecraft PE, tap the top square, tap the iron ore icon, tap the bottom square, and then tap your fuel.
   • On consoles, select your iron ore, press Y or triangle, select your fuel, and press Y or triangle again.

4. 4

   Smelt your sand. Put the sand blocks in the furnace, replenish the fuel if necessary, and then gather the five glass blocks when they're done smelting.

5. 5

   Open your crafting table. Right-click the crafting table (PC), tap the crafting table (PE), or face the crafting table and press the left trigger.

6. 6

   Create iron blocks. Place nine iron bars in each grid square, then click the stack of nine iron blocks and move it to your inventory.

   • In Minecraft PE, just tap the grey iron block to select it, then tap 1 x on the right side of the screen nine times.
   • On consoles, scroll over to the far-right tab, select the magma block, scroll down until you find the iron block, and press A (Xbox) or X (PlayStation) nine times.

7. 7

   Craft the beacon unit. Re-open the crafting table if necessary, then place one obsidian block in each of the bottom grid squares, place the Nether Star in the center grid square, and place one piece of glass in each remaining empty square. Move the resulting beacon to your inventory when it appears. Now you can create the beacon itself.

   • In Minecraft PE, just tap the beacon icon, then tap 1 x.
   • On consoles, find the beacon tab, select the beacon, and press A or X.

Advertisement

1. 1

   Find a place to put your beacon. You will need a flat spot; ideally, your beacon will be close to your home.

2. 2

   Place the iron blocks on the ground. Place three rows of three blocks to create a three-by-three, nine-block total base.

3. 3

   Place your beacon unit. Select the beacon unit, then select the middle iron block. The beacon should light up almost immediately.

4. 4

   Consider adding more layers to the unit. If you want to increase the beacon's power, you can add a five-by-five, 25-block base directly below the three-by-three one.

   • You can add a seven-by-seven, 49-block base below the five-by-five, and you can add a nine-by-nine, 81-block base below the seven by seven.
   • Your beacon can't have a base larger than nine blocks by nine blocks.

Advertisement

1. 1

   Find an effect mineral. To change the beacon's effect, you will need at least one of the following:

   • Iron Ingot
   • Gold Ingot
   • Emerald
   • Diamond
   • Netherite Ingot

2. 2

   Select the beacon. Right-click the beacon (or tap it, or press the left trigger on your controller while facing it) to open it.

3. 3

   Select an effect. Select the effect that you want to receive from the beacon. You will have two options:

   • Speed - Select the claw icon on the left side of the window. This makes you run faster.
   • Haste - Select the pickaxe icon on the left side of the window. This makes you mine faster.
   • The more levels your beacon tower has, the more effects you'll be able to equip.

4. 4

   Add an effect mineral. Click and drag a mineral into the empty box at the bottom of the beacon's window.

   • On Minecraft PE, tap the mineral in the upper-left side of the screen.
   • On consoles, just select the mineral and press Y or triangle.

5. 5

   Select the checkmark. It's the green icon at the bottom of the beacon's window. Doing so will apply your selected effect to the beacon.

Advertisement

Add New Question

• Question

  Do I have to be in survival to operate a beacon?

  

  Karianna Wood

  Community Answer

  No, you don't have to be. You can be in adventure or creative too.

• Question

  Will this work on the PE version on my phone?

  

  Yes.

• Question

  Can I make it with gold, iron, emerald, and diamond?

  

  Kait ADrago-artist

  Community Answer

  Well, you can build the pyramid under it by different materials. It Can be 9x9 to 7x7 to 5x5 to 3x3. And you put a piece of Diamond or iron ingot piece of emerald or gold ingot and it works.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• If you want your beacon light to be a different colour, put any stained glass over the beacon!

• If you don't want to go through the hassle of gathering the beacon's necessary materials, just craft it in creative mode. The beacon itself is pre-assembled, and all you need to do is place it and an iron block in your inventory in order to create the largest beacon you can.

• Don't spawn the wither near your house because it shoots skulls that blow things up.

Advertisement

• Falling from more than 23 blocks high will kill you, so don't build your beacon too high up if you don't have an exit plan.

Advertisement

About This Article

Article Summary X

To make a beacon in Minecraft, start by getting 81 iron ore, 3 blocks of obsidian, 5 blocks of sand, a nether star, and fuel. Once you have all your materials, smelt your iron ore using a furnace and your fuel. Then, put your sand in the furnace to create 5 glass blocks. Next, open your crafting table and put 9 iron bars in each square to create 9 iron blocks. Finally, create the beacon unit by placing an obsidian block in each square at the bottom of the grid, the nether star in the center square, and a piece of glass in each remaining square. To learn more about how to build the beacon tower or change its effect, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 969,525 times.

Did this article help you?

haddadwalach.blogspot.com

Source: https://www.wikihow.com/Make-a-Beacon-in-Minecraft

Share this post